Troubleshooting a Water Heater Emergency: What to Do When It Stops Working
Troubleshooting a Water Heater Emergency: What to Do When It Stops Working
Blog Article
Just how do you feel with regards to What Would Cause My Electric Water Heater to Stop Working??
Numerous contemporary homes utilize an electric water heater for their heating system, as a result of its ease and also convenience of use. However, just like any other electrical home appliances, troubles might occur with its use, suddenly. It can be truly frustrating to get up to a cool shower instead of a hot one or having your bathroom with water that isn't warm sufficient and even too hot. Whatever the instance might be, water heater troubles can be rather nerve-racking. Fortunately, we have actually made a listing of possible remedies to your hot water heater issues. There are a variety of aspects that might create much of these issues, it could be a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the trouble is, getting it repaired need to not present excessive of an issue if you adhere to these steps:
Examine Your Power Supply:
As basic as this might seem, it is very needed. Without adequate power, your water heater will certainly not function. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the problem, merely turn it on and off again. Change any busted or worn-out fuse. Check the appliance with power after these adjustments to see if it's now working.
Examine the Heating Element in the Water Heater:
If it's not a power trouble, then attempt taking a look at your heating element if it is still working. Check each of your heating elements to make sure the issue isn't with any one of them. If any of them is malfunctioning, change that part and after that examine whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot enough, you might need to examine the temperature level settings on your upper thermostat. Make sure the breaker is turned off before doing anything. Open the gain access to panel and press the red switch for temperature level reset over the thermostat. This should help heat up the water. Transform the breaker back on and also check if the trouble has actually been dealt with.
Call An Expert:
If after changing all damaged components and resetting your temperature level, the hot water heater still isn't working, you may need to call a specialist plumber for a specialist point of view. The trouble with your heater could be that the cold and hot faucets have actually been changed or it might be undersized for the quantity of warm water needed in your home. Whatever the situation may be, a specialist plumber would certainly aid address the trouble.
Verdict
Hot water heater troubles are not constantly significant. Most of them are due to minor issues like a blown fuse or worn-out burner. Changing the damaged components must work. Nevertheless, if you are still not able to resolve the problem, give a call to your nearest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I discovered that write up about What Would Cause My Electric Water Heater to Stop Working? while doing a lookup on the web. For those who enjoyed our blog post plz don't forget to pass it around. Thanks so much for your time invested reading it.
Connect for clarity. Report this page